Transcript:

Next we have our Beam Flange Mount Connector. This is designed to attach to the flange of level I-beam or truss. The opening of the clamp is ⅞ of an inch, so you’ll again want to ensure that the structure you’re fitting this over is not larger or thicker than that, and you pretty much clamp it over the mounting piece and then you tighten it down. Using an Allen key through the bottom, you can loosen this screw which allows the clamp on the top of the connector to turn 90 degrees. This allows you to use this connector with trussers or beams that run either parallel to your track or perpendicular to your track.